Packging & Delivery
Min Order1 piece
Briefing
Detailed
Rould 1s protection PCB board for rechargeable lithium ion battery
Picture
Electrical Diagram
Parameters
No | Item | Condition | Specification |
1 | 输入电压/input Voltage | B+/B-间输入电压/input Voltage B+ to B- | -0.3~+26V |
2 | 过充电 Overcharge | 保护电压/Detection voltage | 4.350±0.050V |
3 | 恢复电压/ Release voltage | 4.150±0.050V | |
4 | 保护延迟时间/ Detection delay time | 1.0±0.5S | |
5 | 过放电 Over discharge | 保护电压/Detection voltage | 2.4±0.08V |
6 | 恢复电压/ Release voltage | 3.0±0.10V | |
7 | 保护延迟时间/ Detection delay time | 100±50mS | |
8 | 放电过流 Over discharge current | 放电过流保护电流/Over current | 4.00~ |
9 | 放电过流保护延时/delay time | 10.0±5.0mS | |
10 | 短路保护 | 短路保护延时/ Short detection delay time | 100~600uS |
11 | 恢复条件/Release Conditions | 断开负载/Cut off load | |
12 | 自耗电 Normal current consumption | 工作状态自耗电 Normal current consumption of PCM | Max50.00uA |
13 | OV充电/0V charger | 是否允许0V充电/allowed 0V change | YES |
14 | 建议工作条件 Suggest working conditions | 建议最大持续充/放电电流 max continuous charge/discharge current | |
15 | 建议工作温度/suggest working temperature | ||
16 | 内阻/IR resistance | PCM内阻/ IR of PCM | ≤70.00 mΩ |
17 | PCM尺寸 The size of final PCM | 长度/ The length of final PCM | 17.50± |
18 | 宽度/ The width of final PCM | 17.50± | |
19 | 厚度/ The thickness of final PCM | MAX: | |
20 | 外观 Appearance | 1) 没有元器件的破损/Nothing part deflection 2) 所有焊点良好/The status of solder is all right 3) PCM 没有翘曲/ PCM will not crook 4) 符合力通威的出货外观标准 Settle for LTW Module appearance standard |
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.